Sales Manager: Zhao Jingjie +86-13616170885
Sales Manager: Zhao Yuchen +86-18068285560
Tel:+86-510-83383223
Fax:+86-510-83399006
QQ：931711196
Mob:+86-18921529236
website:http://www.wxxbft.com
Email:931711196@qq.com
Address: No.39 Beihui Road, North Area of Industrial Park, Qianzhou Town, Huishan District, Wuxi City
Working Principle of Cone Mixer
The two asymmetric spirals in the barrel of the DSH series mixer lift the material upwards by rotation, while the rotating arm do the revolution slowly; the material outside the spirals enters the stud to varying degrees, so as to achieve the continuous update and diffusion of the material in the entire circumference. The upper two strands of material then merge into the central cavity to form a downward material flow, which supplements the vacancy at the bottom, thus forming a triple mixing effect of convection circulation. With the rapid rotation of the two asymmetric spirals of the mixer, the material rises upward, forming two asymmetric spiral material flows from bottom to top along the barrel arm. The spiral revolution movement driven by the rotating arm causes the materials outside the spirals to enter the envelope of the stud to varying degrees. Part of the material is lifted by a misalignment, and the other part is thrown out of the stud, so as to achieve the continuous update and diffusion of the material in the entire circumference. The two mentioned strands of materials on the upper part merge to the central cavity to form a downward material flow, which supplements the cavity at the bottom, thus forming a convective circulation. Due to the combination of the above motions, the material is uniformly mixed in a short time, and the mixing degree is high.
Technical Parameters of Cone Mixer
| Specifications(m3) | Motor Power(kw) | Speed of Rotation(R/min) | One-time Mixing(kg)(m3) | Maximum External Dimension (mm) | Equipment Weight |
| DSH-0.1 | 1.5 | 2/108 | <60 | ∮750×1580 | 250 |
| DSH-0.5 | 3 | 2/108 | <300 | ∮1150×2320 | 600 |
| DSH-1 | 4 | 2/57 | <600 | ∮1480×2850 | 1200 |
| DSH-2 | 5.5 | 2/57 | <1200 | ∮1820×3510 | 1500 |
| DSH-3 | 7.5 | 1.8/57 | <1800 | ∮2050×3800 | 2300 |
| DSH-4 | 11 | 1.8/57 | <2500 | ∮2250×4480 | 2500 |
| DSH-5 | 15 | 1.8/57 | <3000 | ∮2350×4720 | 2800 |
| DSH-6 | 15 | 1.8/57 | <3600 | ∮2560×4980 | 3000 |
| DSH-8 | 18.5 | 1.8/57 | <4200 | ∮2780×5360 | 4500 |
| DSH-10 | 18.5 | 1.8/57 | <6000 | ∮3020×5810 | 5500 |
| DSH-15 | 22 | 1.8/57 | <9000 | ∮3460×6510 | 6800 |
| DSH-20 | 37 | 1.8/57 | <12000 | ∮3810×7420 | 9800 |
| DSH-25 | 45 | 1.8/57 | <15000 | ∮4090×7800 | 11000 |
| DSH-30 | 55 | 1.8/57 | <18000 | ∮4350×8200 | 12500 |
